Items 15201 - 15250 of 33504
In stock
T-nut DIN508 M5, 8mm slot
Top rated
T nut DIN508 M6, slot 8mm
In stock
T-nut DIN508 M8, 10mm slot
T-connector connection STVS-QFCK-M230, connections selectable
T-plug screw STVS-qteck-M230, connections selectable
T-plug screw STVS-QTECKO-M230, M push 230 stainless steel with a cylindrical male thread, pivotable. selectable ports
In stock
T-connector PE 06, 6mm
In stock
T-connectors PE 08, 8mm
In stock
T-connector STVS-QFCK-M110, connections selectable
T-connector STVS-QFCK-M140, connections selectable
In stock
T-connector STVS-QFCK-M220, connections selectable
In stock
T-connector, reducing STVS-QFCK-M120, connections selectable
T-push-in fitting - size selectable
- fast and quickly hose connections
- 8-3/8"
T-Push-STVS QTCKO-M220, connections selectable
In stock
T-Push-STVS qteck-M120, connections selectable
In stock
T-Push-STVS qteck-M220, connections selectable
T-Push-STVS QTECKO-M120, connections selectable
T-Push-STVS QTECKO-M220, M push 220 brass plated with cylindrical external thread, pivotable. selectable ports
T-piece - size selectable
In stock
T-connector plate D30 (set), 1 sliding block slot 8, 2 screws DIN7991 - M6 x 14, 1 screw DIN 7991 - M6 x 20, galvanized steel
In stock
T-connector plate D30 (set), 2 slot nuts slot 6, 2 screws DIN7991 - M6 x 12, 1 screw DIN 7991 - M6 x 20, galvanized steel
In stock
T-connector plate Sapla 30 B-type slot 8
Material: die-cast aluminum
Material: die-cast aluminum
Top rated
T-connector plate Sapla 30 B-type slot 8
with mounting kit Material: die-cast aluminum
with mounting kit Material: die-cast aluminum
In stock
T-connection plate Sapla 45 B-type groove 10Material: die
In stock
T-connection plate Sapla 45 B-type slot 10, with set fixing material: Aluminum die cast
In stock
T-connector plate, 117x117mm, 90°, 12-hole, ø7mm, aluminum anodized E6/EV1
T-connection plate, 87x87mm, 90°, 5-hole, ø7mm, aluminum matt nickel-plated
In stock
T-connector plate, 88.5x88.5mm, 90°, 5-hole, silver anodized E6/EV1
In stock
Holes ISO E8, feather keyways according to DIN 6885/1 (from hole 24 with flat keyway 1.3 mm). British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 1/4" x 1/2". Width across flats 3 mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
In stock
Bores ISO E8, keyways according to DIN 6885/1 (bore 28 with flat keyway 1.3 mm). British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 1/4" x 1/2". Width across flats 3mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
In stock
Holes ISO E8, keyways according to DIN 6885/1. British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 3/8" x 5/8". Width across flats 5mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
In stock
Material: GG25.
Holes ISO E8, keyways according to DIN 6885/1. Imperial bores with keyway to British Standard (BS). Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 3/8" x 5/8". Wrench size 5 mm (replacement screw: Art. 622 503 99, order quantity depends on requirements). Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
Tightening torque: 20 Nm. Slip torque (when used without feather key, approx. values without guarantee): Bore 19 mm: 98 Nm. Bore 24mm: 135Nm. Bore 38mm: 240Nm. Bore 42mm: 265Nm.
In stock
Taper-Spannbuchse 1615 Bohrung 30mm
In stock
Holes ISO E8, keyways according to DIN 6885/1. British Standard (BS) inch bores with keyway. Ground cone and front face. Thread BSW. Delivery including screws. Screw size BSW 7/16 x 7/8". Width across flats 6 mm. Shaft tolerance +0.05 / -0.125 mm. Can be used with or without a key, depending on the torque required.
In stock
Stylus cap, flat, covered, white
In stock
TE-Push-STVS qteck-M110, connections selectable
Partial extension - L 214 mm / TL 10 kg with mounting holes and M4 thread in OM
Partial extension - L 300 mm / TL 27 kg
Partial extension - L 310 mm / TL 10 kg with mounting holes and M4 thread in OM
Partial extension - L 350 mm / TL 27 kg
Partial extension can be pulled out on both sides - L 246 mm / TL 15 kg
In stock
Partial extension can be pulled out on both sides - L 342 mm / TL 15 kg
Out of stock
Partial extension can be pulled out on both sides - L 400 mm / TL 27 kg
Items 15201 - 15250 of 33504