PanelDue 4,3 inch

Numéro d'article: PanelDue
Code barre – EAN /GTIN: 4068221802861
catégorie: Add-ons

PanelDue 4,3 inch

71,90 €

inclus 19% TVA , plus (Paketversand bis 1m)

Available immediately
Temps de livraison: 5 - 6 jours ouvrables À l'étranger

Description
Évaluations

PanelDue

The PanelDue is a colour touch screen controller for the Duet and other 3D-printing electronics that support it.

Features
- The control board and firmware support 3 screen sizes: 4.3", 5" and 7", at two resolutions: 480×272 (4.3-inch displays)
or 800×480 pixels (5- and 7-inch displays). (Note that the lower resolution of the 4.3" display means that it cannot display as much
information on the screen - for example a maximum of 4 extruders, as shown in the picture.)
- We are now supplying the 5 inch and 7 inch LCD and PanelDue as an integrated unit: the PanelDue 5i or PanelDue7i.
- 5V power from host 3D printer controller.
- 2-wire async serial interface with 3.3V signal level (5V tolerant input).
- Connections to the onboard micro SD card socket as well as the PanelDue serial and power connections are all available via a
10-way ribbon cable. A 300mm long ribbon cable (maximum recommended length) is supplied.
- 4-wire cable to connect the PanelDue to your controller board for the serial and power connections. This cable is also supplied (1m long).
- The control board without a screen is also available; however a 4.3", 5" or 7" SSD1963 LCD panel is required and the instructions on
David Crocker's PanelDue blog must be followed.

Documentation
- Connecting a PanelDue

Poids de livraison:	0,50 Kg
Poids de l'article:	0,50 Kg

#product rating.noReviewsInAllLang#

Les clients ont également acheté les articles suivants :

Duet 3 Mini 5+ Wifi

139,90 € *

DIN 912 vis à six pans creux, A2 en acier inoxydable, M3X8 (VO)

0,30 € *

la poulie de détour / largeur de la courroie dentée avec des roulements à billes GT2 6 mm - 16 dents, alésage 3,00mm

3,20 € *